冲击载荷下各向异性煤体渗透-应力敏感性试验研究*

为揭示冲击煤样渗透率的变化规律，通过立式分离式霍普金森（SHPB）冲击装置对不同层理方向煤样进行动态冲击，进而采用渗透仪对冲击后的煤样进行渗透率测试，分析不同冲击荷载下煤岩的渗透率及应力敏感性。结果表明:冲击煤样的渗透率远大于原煤样品，冲击载荷越大，渗透率越大；在相同的冲击载荷和气体压力下，平行于层理方向的煤样渗透率最大，其次是斜交45°层理方向的煤样渗透率，垂直于层理方向的煤样渗透率最小；渗透率受有效应力影响显著；在冲击荷载的作用下，垂直于层理方向煤样渗透率的变化率对孔隙压力更为敏感。     

维修时间不确定性下配电网灾后维修队安排的鲁棒恢复研究*

为最小化灾后配电网损失量，准确描述完整维修队工作时间（分为路途时间与具体维修时间），依据台风路径对维修队所需路途时间进行分类，并利用期望概率描述具体维修时间的不确定性。建立2阶段分布式鲁棒优化模型，采用CCG算法分析国内某地区配电网算例发现:考虑维修时间不确定性可以有效减少配电网损失量。     

Experiment and simulation research of evolution process for LNG leakage and diffusion

The frequent occurrence of LNG leakage accidents has caused serious economic loss and environmental damage. Experiments and simulations can be combined to obtain the transient process of LNG leakage and diffusion. This paper analyzed LNG leakage diffusion rules with experiment results obtained by depleting 1.4t LNG. The vapor clouds and LNG concentration are measured, which can be a comparison with the simulation results. Computational fluid dynamics and gas diffusion theory were chosen as the theoretical basis, simulating the transient process of LNG gasification to obtain the diffusion concentration rules. The simulation of LNG diffusion is divided into two parts: LNG leakage at the source and atmospheric diffusion. The maximum concentration of methane in the experiment was 4.1%, and the maximum concentration in the simulation was 4.6%. The results show good agreement of the deviation statistics, which fall in the standard recommendation value range. Then we make a prediction of the dangerous concentration area and the flammability hazard zone of LNG leakage accident. The simulation results show that the range of the lower wind direction danger area firstly increases and then decreases, and the maximum distance of IDLH increases firstly and arrived at the peak of 52  m at 300s.     

Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

Quantitative risk analysis (QRA) has been widely used to conduct the assessment of offshore accidental risks. However, the accuracy and validity of QRA is significantly affected by uncertainties when subjective judgments are involved. Therefore, it is unrealistic to determine the probability of a hazardous event by using one single explicit value when safety experts have a relatively low confidence level in their judgments. This paper proposes a new methodology for incorporating uncertainties into conventional QRA using the concept of confidence level. Offshore hydrocarbon release hazards are focused on and a barrier and operational risk analysis (BORA-Release) method is selected as the basic model to illustrate the proposed methodology. A left–right (L–R) bell-shaped fuzzy number is employed and its membership curve is able to control its shape to represent different confidence levels. As to the complex geometry of the bell-shaped fuzzy number, an α-cut operation is introduced to conduct the arithmetic operations of the fuzzy number, and a defuzzification method with total integral value is chosen to match the α-cut operations and acquire complete information for the fuzzy numbers. In the meantime, an optimism index is used to describe the attitude of the decision-maker. One case study is provided in this paper to demonstrate the implementation of this method.     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

Field effectiveness evaluation of advanced driver assistance systems

Abstract

Objective: Advanced driver assistance systems (ADAS) are a class of vehicle technologies designed to increase safety by providing drivers with timely warnings and autonomously intervening to avoid hazardous situations. Though laboratory testing suggests that ADAS technologies will greatly impact crash involvement rates, real-world evidence that characterizes their effectiveness is still limited. This study evaluates and quantifies the association of ADAS technologies with the likelihood of a moderate or severe crash for new-model BMWs in the United States.

Methods: Vehicle ADAS option information for the cohort of model year 2014 and later BMW passenger vehicles sold after January 1, 2014 (n?=?1,063,503), was coded using VIN-identified options data. ADAS technologies of interest include frontal collision warning with autonomous emergency braking, lane departure warning, and blind spot detection. BMW Automated Crash Notification system data (from January 2014 to November 2017) were merged with vehicle data by VIN to identify crashed vehicles (n?=?15,507), including date, crash severity (delta V), and area of impact. Using Cox proportional hazards regression modeling, the study calculates the adjusted hazard ratio for crashing among BMW passenger vehicles with versus without ADAS technologies. The adjusted percentage reduction in moderate and severe crashes associated with ADAS is interpreted as one minus the hazard ratio.

Results: Vehicles equipped with both autonomous emergency braking and lane departure warning were 23% less likely to crash than those not equipped (hazard ratio [HR]?=?0.77; 95% confidence interval [CI], 0.73–0.81), controlling for model year, vehicle size and body type. Autonomous emergency braking and lane departure warning generally occur together, making it difficult to tease apart their individual effects. Blind spot detection was associated with a 14% reduction in crashes after controlling for the presence of autonomous emergency braking and lane departure warning (HR =0.86; 95% CI, 0.744–0.99). Differences were observed by vehicle type and crash type. The combined effect of autonomous emergency braking and lane departure warning was greater in newer model vehicles: Equipped vehicles were 13% less likely to crash (HR =0.87; 95% CI, 0.79–0.95) among 2014 model year vehicles versus 34% less likely to crash (HR =0.66; 95% CI, 0.57–0.77) among 2017 model year vehicles.

Conclusion: This robust cohort study contributes to the growing evidence on the effectiveness of ADAS technologies.     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

整合消费与增加值视角的中国行业碳排放变动分解研究

在研究影响我国CO 2排放因素领域,基于投入产出技术的分解模型已成为主要的分析工具,现有研究多分别基于消费视角或收益视角展开分析。为全面评估各行业收益与消费对其上游、下游行业碳排放的综合影响,整合基于收益与基于消费两个视角,运用2012年与2015年我国投入产出表,构建两层嵌套式结构分解分析模型(SDA),比较分析消费规模效应、收益规模效应、行业流入、流出增加值变动效应、增加值结构变动效应等14个影响各行业碳排放变动的关键因素,并借助对消费者原则碳排放估算公式的重构,更准确地实现从增加值视角对各行业消费者原则碳排放变动的关键影响因素分析。研究发现:①研究期内,我国在总产出增长29.14%的同时碳排放量上升1.46%,各行业碳排放强度下降是主要的减排因素,其中建筑业减排贡献最大。②增排效应方面,影响从大到小依次为消费规模、收益规模、完全投入结构与完全消费结构四项效应,且前两个规模效应的影响是后两个结构效应的2倍以上,尤其建筑业消费规模效应、煤炭采选产品业收益规模效应增排较大。③消费规模扩大导致增排的原因并非行业本身生产规模扩大,而主要在于建筑业、服务业等行业规模扩张时吸收其他行业流入的增加值量增多。④收益规模扩大导致的增排效应方面,细分来说从大到小依次为劳动者报酬、生产税净额、固定资产折旧、营业盈余四项效应,且行业差异显著,如煤炭采选产品业的劳动者报酬效应,石油、炼焦产品和核燃料加工品业的生产税净额效应以及电力、热力生产和供应业的营业盈余效应增排贡献较大,而煤炭采选产品业的营业盈余效应、批发、零售业和住宿、餐饮业的生产税净额效应则减排贡献较大。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线，以某化工厂距离高铁路线最近的丙烯球罐为例，提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案，利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟，并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故，会给附近铁路线带来严重破坏；丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时，保护措施不足；隧道的安全可靠性要高于仅设1道防爆墙，隧道长度需覆盖最小隔离区域的可及范围，在扩散区域内也需设立普通挡墙，在极度危险情况下，需要实施高铁停开等保护措施。     

生化法污水处理技术探讨

在城市发展中,人口增多和居民生活方式的变化都加大了城市污水量的增加,现代城市污水已经对地下水体产生了污染,人们的生活用水受到了严重影响。在国家环保要求下,利用先进污水处理式方法对城市污水进行处理至关重要,本文对城市污水特点进行了分析,并重点对生化法污水处理工艺进行了分析,希望能为行业内人士提供参考,提高城市污水的净化能力,促进城市的持续发展。